Skip to Main Content
Cumulocity IoT Feedback Portal
ADD NEW FEEDBACK

Smart rules

Showing 16

Smart rules inheritance

Adding a device to a group, which has Smartrules applied, you have to select the device manually to apply the Smartrule in the cockpit. It would be good to have this applied automatically as soon as a device get's a group assigned all Smartrules w...
Guest over 3 years ago in Cumulocity IoT Streaming Analytics (inc. Apama) / Smart rules 2 Likely to support/improve

Apama modules (and smart rules) for Groups - improvement

If a group is selected as source for rule or module, the changes in group (add/remove devices) are not reflected in the process until the module/rule is deactivated and activated again. This leads to confusion when customers realize, their rules a...
Peter Gaspar about 4 years ago in Cumulocity IoT Streaming Analytics (inc. Apama) / Analytics Builder / Smart rules 0 Likely to support/improve

Extend Smart rules "Create alarm when measurement reaches explicit thresholds" with alarm priority

It shall be possible to specify alarm priority (critical, ..., warning) in the smart rules "Create alarm when measurement reaches explicit thresholds". Since this functionality does not exists, such a simple functionality has to be created with Ap...
Guest about 3 years ago in Cumulocity IoT Streaming Analytics (inc. Apama) / Smart rules 2 Clarification needed

Add smart rule for email on alarm SEVERITY

Most of our customers only want to be emailed for critical alarms. This is a challenging process with the current smart rules. We have to gather together all the potential critical alarms (we can have up to 1000 of these). Having smart rule which ...
Guest almost 5 years ago in Cumulocity IoT Streaming Analytics (inc. Apama) / Smart rules 1 Future consideration

Smart rules: Filter alarms by severity / All alarms

We would like to be able to define a simple SmartRule to forward all occurring alarms or all emails of a certain severity. E.g. to send all critical alarms also as email.
Guest over 3 years ago in Cumulocity IoT Streaming Analytics (inc. Apama) / Smart rules 1 Future consideration

Provide flexibility in setting alarm severity.

Hi, The customer would like to be able to control the create and cleared of alarms using the standard smart rules function without using the EPL App. Specifically, they would like to see the following functionality implemented. It is possib...

Smart rule clone function only on active rules/ Cannot use groups

TTControl internal: 1663 Smart rule group handling should be automatic (no need to go to the device). If you clone a smart rule from device A to device B, the following message will appear "Smart rule successfully cloned" but they will be effectiv...
oana velicu about 2 years ago in Cumulocity IoT Streaming Analytics (inc. Apama) / Smart rules 0 Future consideration

Smart rule: On measurement explicit threshold create alarm

When creating a Smart Rule "On measurement explicit threshold create alarm" the following changes shall be made: The switch "Enabled" in the upper part is not working when saving the smart rule. When saved it needs to be manually switched on (in t...
oana velicu about 2 years ago in Cumulocity IoT Streaming Analytics (inc. Apama) / Smart rules 1 Future consideration

Ability to grant users granular permissions to specific smart rules

Currently, role based access permissions within Cumulocity do not provide granular enough control over which smart rules a user can create. Given that certain smart rules result in billable events while other do not, it is desired to be able to co...
Guest almost 3 years ago in Cumulocity IoT Streaming Analytics (inc. Apama) / Smart rules 1 Unlikely to support

Global smart rules should not be deleted when smart rules are deleted from a device or group.

No description provided