Skip to Main Content
Cumulocity IoT Feedback Portal
ADD NEW FEEDBACK

All feedback

Showing 408 of 408

It should be possible to copy widgets from one dashboard to another

For example, I have an Alarm List widget configured with several custom alarm types (around 30) and I should be able to copy the widget including its list of alarm types over to another dashboard.
Guest about 2 years ago in Cumulocity IoT Cockpit and WebSDK / Dashboarding / Widgets 1 Future consideration

IoT Broker / Accept generic MQTT payload / Inbound translation

Extend Cumulocity IoT to be able to integrate any MQTT device independendly of its message format. Currently it is not possible to integrate an MQTT enabled device which sends payloads differntly from what Cumulocity expects or expects downstream ...
Guest about 5 years ago in Cumulocity IoT Platform Services / Data in Motion 6 Planning / planned

Apama modules (and smart rules) for Groups - improvement

If a group is selected as source for rule or module, the changes in group (add/remove devices) are not reflected in the process until the module/rule is deactivated and activated again. This leads to confusion when customers realize, their rules a...
Peter Gaspar over 4 years ago in Cumulocity IoT Streaming Analytics (inc. Apama) / Analytics Builder / Smart rules 0 Likely to support/improve

MEA types/series names should not be altered by LwM2M agent

The LwM2M agent adds a suffix to the type (and series, for measurements) of measurements, events, and alarms that it creates from received values. The suffix reflects the object instance and resource ID in the resource path. This alteration means ...
Guest 9 months ago in Cumulocity IoT Device Mgmt. & Connectivity 1 Planning / planned

Password-change UX should consider server-synchronization

When a user changes the password (today in Cumulocity v10.15), the UX provides a success-message of the change without any conditions. However, the password may not be usable for some additional minutes as the change has not been synchronized acro...
Christoph Marschall over 1 year ago in Cumulocity IoT Platform Services / Authentication & Authorisation 1 Likely to support/improve

device protocol interprete holding register as DINT/REAL

In the "New holding register" dialog of the device protocols it is possible to configure the transformation of the passed bits. The number of bits can be configured. However, only integer numbers are interpreted. However, the holding registers can...
Thomas Kühn 9 months ago in Cumulocity IoT Device Mgmt. & Connectivity 1 Unlikely to support

Notification 2.0 API - Send notifications for changes to devices within a group

UC: subscription to the API "managedobjects", context "mo" and a group id as source.With such a subscription one gets notifications only for property changes to the group itself. It would also be nice to have the possibility to get notifications f...
Frédéric Joulin over 2 years ago in Cumulocity IoT Platform Services / Data in Motion / Platform Management 0 Future consideration

Notification 2.0 API - Send notifications for group deletions

With a subscription to the API "managedobjects" on the context "tenant", notifications are sent whenever a group is created in Cumulocity IoT. Nevertheless, no notification is sent when a group is deleted. As no notification is sent either with a ...
Frédéric Joulin over 2 years ago in Cumulocity IoT Platform Services / Data in Motion 0 Likely to support/improve

Allow custom LwM2M decoder microservice to create/update arbitrary inventory fragments

A custom decoder microservice can return dataFragments to the LwM2M agent in order to update the managed object, but this is only capable of updating the fragment specific to the LwM2M resource, e.g. "dataFragments" :[ { "value" : "Hello World" , ...
Guest over 1 year ago in Cumulocity IoT Device Mgmt. & Connectivity / LWM2M 2 Future consideration

Access timestamp from custom LwM2M decoder microservice

When a decoder microservice is used as a custom action to process a LwM2M payload, it would be useful to have access to the timestamp if it it present in the SenML-JSON/CBOR message. That is, if the payload is received by the LwM2M agent as the re...
Guest over 1 year ago in Cumulocity IoT Device Mgmt. & Connectivity 2 Future consideration