Cumulocity IoT Feedback Portal
ADD NEW FEEDBACK

My feedback: Cumulocity IoT

Showing 28 of 372

Output block for creating multiple measurements

For analysing or preparing data several extra measurements by the analytics builder can be required. We made the experience that every measurement we create by the analytics builder is counted as an extra message and has a huge impact on our MEAs ...
Hendrik Sandkötter 6 months ago in Cumulocity IoT Streaming Analytics (inc. Apama) / Analytics Builder 0

User-defined 'Titles' and usage 'Descriptions' for Analytics Builder block instances

Even relatively simple models in Analytics Builder can be tricky to understand. Right now, the only method to document the design intent, or the method of operation of a model is to enter a lengthy description into the "Description" field in the M...
Neil C about 1 year ago in Cumulocity IoT Streaming Analytics (inc. Apama) / Analytics Builder 1 Future consideration

Less error-prone tag creation for Analytics Builder models

The new facility to tag Analytics Builder models, and filter them by state and tag is a really helpful addition. When entering tags, I found the behaviour of the form slightly un-intuitive: If you type just a single tag name, then press <OK>...
Neil C about 1 year ago in Cumulocity IoT Streaming Analytics (inc. Apama) / Analytics Builder / Web app (UI) 1 Future consideration

Streaming Analytics should support organising of models into "folders" or "buckets"

Currently, Analytics Builder models and EPL Apps are represented as tiles, in a flat view. If many models or apps are defined, this can involve scrolling through several pages to find the model you're looking for.If it were possible to drag/drop m...
Neil C over 1 year ago in Cumulocity IoT Streaming Analytics (inc. Apama) / Web app (UI) 0 Likely to support/improve

Possibility to clear alarm with SmartRules or AnalyticsBuilder

It is not possible to clear Alarm with the Streaming Analytics only with EPL. But there is not an easy way to clear some Alarms if they have reached a specific time or so on. Alarms could only be created but to clear Alarm there are no easy possib...
Guest over 1 year ago in Cumulocity IoT Streaming Analytics (inc. Apama) / Analytics Builder 1 Clarification needed

Analytics Builder "Simulation Mode" should support consuming data from the DataHub SQL API (in addition to C8y API)

Currently, Analytics Builder simulation mode is only capable of consuming data which is stored in MongoDB. This means that long retention periods must be set for data that is expected to be used for simulation or regression testing of Analytics Bu...
Neil C over 1 year ago in Cumulocity IoT Streaming Analytics (inc. Apama) / Analytics Builder 1 Future consideration

Analytics Builder "Simulation Mode" should support simulating in accelerated time

Analytics Builder currently has a simulation mode, which allows an Analytics Builder to consume historical data from the Operational Store (MongoDB), and feed it in real-time to a model. One limination of this feature is that, if you are trying to...
Neil C over 1 year ago in Cumulocity IoT Streaming Analytics (inc. Apama) / Analytics Builder 1 Future consideration

Analytics Builder "Simulation Mode" should support simulating groups of devices

Analytics Builder currently has a simulation mode, which allows an Analytics Builder to consume historical data from the Operational Store (MongoDB), and feed it in real-time to a model. However, this simulation capability is limited to models tha...
Neil C over 1 year ago in Cumulocity IoT Streaming Analytics (inc. Apama) / Analytics Builder 0 Future consideration

Smart rule clone function only on active rules/ Cannot use groups

TTControl internal: 1663 Smart rule group handling should be automatic (no need to go to the device). If you clone a smart rule from device A to device B, the following message will appear "Smart rule successfully cloned" but they will be effectiv...
oana velicu almost 2 years ago in Cumulocity IoT Streaming Analytics (inc. Apama) / Smart rules 0 Future consideration

Apama measurements should support integer value similar to Cumulocity API

If Cumulocity API allows floats and integers for measurement values then Cumulocity Apama should support integers also. Float is problematic when Cumulocity user expects integer values but get floats. 0 and 1 can represent false and true. 0.0 and ...
Guest almost 2 years ago in Cumulocity IoT Streaming Analytics (inc. Apama) / Apama (standalone) / EPL apps 3 Future consideration